Polycom 1500/1800/2000/4000 manual Cascadelinkplaytoneon, Connection, Cellindlocation, Bottomleft

		System Configuration Flags
Manually Added, Modified, Deleted System Flags
Flag	Description
CASCADE_LINK_PLAY_TONE_ON	When set to YES, the RealPresence Collaboration Server plays a tone
_CONNECTION	when a cascading link between conferences is established. The tone is
	played in both conferences.
	This tone is not played when the cascading link disconnects from the
	conferences.
	The tone used to notify that the cascading link connection has been
	established cannot be customized.
	Default value: NO.
	The tone volume is controlled by the same flag as the IVR messages and
	tones: IVR_MESSAGE_VOLUME.
CELL_IND_LOCATION	Change the location of the display of Network Quality Indicators displayed
	in the cells of the conference Video Layout.
	Default: TOP_RIGHT
	Range:
	•	BOTTOM_LEFT
	•	BOTTOM_RIGHT
	•	TOP_LEFT
	•	TOP_RIGHT
CFG_KEY_ENABLE_FLOW_CONT	Used to enable or disable sending a re-INVITE to endpoints to adjust their
ROL_REINVITE	data rate. When set to YES, re-INVITE is used for endpoints that do not
	support flow control in SIP using either the Information or RTCP Feedback
	mechanisms.
	Default: NO.
CONF_GATHERING_DURATION_S	The value of this System Flag sets the duration of the Gathering Phase in
ECONDS	seconds. The Gathering Phase duration of the conference is measured
	from the scheduled start time of the conference.
	Range: 0 - 3600
	Default: 180
	For more information see Video Preview (AVC Participants Only)
CP_REGARD_TO_INCOMING_SE	For use in the Avaya Environment.
TUP_RATE	If set to YES, the RealPresence Collaboration Server calculates the line
	rate for incoming calls in CP conferences, according to the line rate which is
	declared by the endpoint in the H.225 setup message.
	If set to NO, the rate is calculated according to the conference line rate
	regardless of the rate in the H.225 setup message.
	Default: YES.
CPU_BONDING_LINK_MONITORI	Used when using the MII Monitor for troubleshooting networks.This flag
NG_FREQUENCY	sets the MII Polling Interval in milliseconds. A value of zero disables MII
	monitoring.

Default: 100

Polycom®, Inc. 780