Polycom 1500/1800/2000/4000 REMOVEH323HIGHPROFILE, Captononpolycomvend, REMOVEH323HIGHQUALITY

		System Configuration Flags
Manually Added, Modified, Deleted System Flags
Flag	Description
REMOVE_H323_HIGH_PROFILE_	Used to disable High Profile protocol. Use of Polycom’s proprietary
CAP_TO_NON_POLYCOM_VEND	protocol, High Profile, may result in interoperability issues when used with
OR	other vendors’ endpoints.
	Possible values: YES / NO
	Default: NO
REMOVE_H323_HIGH_QUALITY_	Used to disable the following Audio Codecs:
AUDIO_CAP_TO_NON_POLYCOM	•	G231
_VENDOR	•	G7221C
	•	G7221
	•	G719
	•	Siren22
	•	Siren14
	Possible values: YES / NO
	Default: NO
REMOVE_H323_LPR_CAP_TO_N	Used to disable H.323 LPR protocol. Use of Polycom’s proprietary protocol,
ON_POLYCOM_VENDOR	H.323 LPR, may result in interoperability issues when used with other
	vendors’ endpoints.
	Possible values: YES / NO
	Default: NO
REMOVE_IP_IF_NUMBER_EXIST	Between the time a conference is scheduled and when it becomes active,
S	the IP of an endpoint may change, especially in an environment that uses
	DHCP. This flag determines if the E.164 number is to be substituted for the
	IP address in the dial string.
	Range: YES / NO
	Default: YES - The IP address will be substituted with the E.164 number.
RFC2833_DTMF	Controls the receipt of in-band and out-of-band DTMF Codes. When set to:
	• YES The RMX will receive DTMF Codes sent in-band.
	• NO The RMX receive DTMF Codes sent out-of-band.
	The RMX always sends DTMF Codes in-band (as part of the Audio Media
	stream).
	Range: YES/NO
	Default YES
RMX_MANAGEMENT_SECURITY_	Enter the protocol to be used for secure communications.
PROTOCOL	Default: TLSV1_SSLV3 (both).
	Default for U.S. Federal licenses: TLSV1.
RTCP_FIR_ENABLE	When set to YES, the Full Intra Request (FIR) is sent as INFO (and not
	RTCP).
	Default = YES
RTCP_FLOW_CONTROL_TMMBR	Enables/disables the SIP RTCP flow control parameter.
_ENABLE	Default: YES

Polycom®, Inc. 796