Polycom 1500/1800/2000/4000 manual Changed

Appendix C - CDR Fields, Unformatted File

Event Fields for Events 17, 23 - H323 PARTICIPANT CONNECTED, SIP PARTICIPANT CONNECTED

Field	Description
Remote	Not supported.
Communication	Always contains the value 0.
Mode
Secondary Cause	Note: This field is only relevant if the Participant Status is Secondary.
	The cause for the secondary connection (not being able to connect the video channels), as
	follows:
	0 - Default
	11 - The incoming video parameters are not compatible with the conference video
	parameters
	13	- The conference video settings are not compatible with the endpoint capabilities
	14	- The new conference settings are not compatible with the endpoint capabilities
	15	- Video stream violation due to incompatible annexes or other discrepancy
	16	- Inadequate video resources
	17	- When moved to a Transcoding or Video Switching conference, the participant’s video
	capabilities are not supported by the video cards
	18	- Video connection could not be established
	24	- The endpoint closed its video channels
	25	- The participant video settings are not compatible with the conference protocol
	26 - The endpoint could not re-open the video channel after the conference video mode was
	changed
	27 - The gatekeeper approved a lower bandwidth than requested
	28	- Video connection for the SIP participant is temporarily unavailable

255 - Other

Event Fields for Event 18 - NEW UNDEFINED PARTICIPANT

Field	Description
Participant Name	The name of the participant.
Participant ID	The identification number assigned to the participant by the MCU.
Dialing Direction	The dialing direction, as follows
	0	- Dial-out
	5	- Dial-in

Bonding Mode

Not supported.

Always contains the value 0.

Number of	The number of channels being connected for this participant.
Channels	Note: This field is only relevant to ISDN/PSTN participants.
Net Channel Width	Not supported.
	Always contains the value 0.

Polycom®, Inc. 935