Polycom 1500/1800/2000/4000 manual Update the repository, Re-connect to the RMX

Ultra Secure Mode

gClick Yes to proceed.

The system checks the CRL file and displays a message that the certificate was loaded successfully.

hRepeat Steps d through f until all of the required CRL files has been updated.

Step 4: Update the repository.

When all the CRL files have been updated as described in Step 3. a Click Update Repository.

A repository update confirmation message is displayed.

bClick OK to update the repository.

Step 5: Re-connect to the RMX.

aRemove the USB device that was connected in Step 2a.

bRestart the RMX.

cIn the RMX Management pane, click the Hardware Monitor button. The Hardware Monitor pane is displayed.

dClick the Reset button.

The RMX restarts. System restart can take 5 - 10 minutes, depending on the RMX’s configuration. Using the RMX Manager:

eIn the MCUs list, select the RMX to be updated.

fRight-click in the MCUs list entry and select Connect.

gClick Accept to accept the warning banner.

hEnter an administrator Username and Password.

iClick OK.

Step 6: Re-enable Secured Communications Mode.

Using the RMX Manager:

aIn the RMX Management pane, click the IP Network Services button. (Depending on the RMX Manager configuration, you may have to click Rarely Used first.)

bIn the IP Network Services list pane, double-clickManagement Network.

Polycom®, Inc. 834