Polycom 1500/1800/2000/4000 Forceaudiocodecforms, Singlecore, Forceencryptionforund, FORCEG711A

	System Configuration Flags
Manually Added, Modified, Deleted System Flags
Flag	Description
FORCE_AUDIO_CODEC_FOR_MS	This flag is used to force the use of a specific Audio algorithm when a
_SINGLE_CORE	Microsoft Office Communicator R2 or Lync Client is hosted on a workstation
	with a single core processor. The flag value overrides the default audio
	algorithm selection (G.722.1) that may cause audio quality problems when
	G.722.1 is used by Microsoft Clients running on single processor
	workstations.
	This flag can be set to:
	• AUTO – No forcing occurs and the Collaboration Server negotiates a full
	set of Audio algorithm during capabilities exchange.
	• G711A/U or G722 – Set this flag value according to the hosting
	workstation capabilities. If the Collaboration Server detects single core
	host during capabilities exchange it will assign a G.711 or G.722 Audio
	algorithm according to the flag value.
	Possible values: AUTO, G711A, G711U, G722
	Default: G711A
FORCE_ENCRYPTION_FOR_UND	When set to YES, Undefined participants must connect encrypted,
EFINED_PARTICIPANT_IN_WHEN	otherwise they are disconnected.
_AVAILABLE_MODE	When set to NO (default) and the conference Encryption in the Profile is set
	to Encrypt When Possible, both Encrypted and Non-encrypted Undefined
	participants can connect to the same conferences, where encryption is the
	preferred setting.
	Default: NO
FORCE_G711A	Setting this flag forces the use of the G711A Audio Codec.
	Possible values: YES / NO
	Default: NO
FORCE_RESOLUTION	Use this flag to specify IP (H.323 and SIP) endpoint types that cannot
	receive wide screen resolution and that were not automatically identified as
	such by the Collaboration Server.
	Possible values are endpoint types, each type followed by a semicolon. For
	example, when disabling Wide screen resolution in an HDX endpoint enter
	the following string: HDX;
	Note: Use this flag when the flag SEND_WIDE_RES_TO_IP is set to YES.
FORCE_STATIC_MB_ENCODING	This flag supports Tandberg MXP mode of sending and receiving video by
	IP endpoint in HD 720p resolution and Video Quality set to Motion. This
	mode is not supported for ISDN endpoints.
	Default value: Tandberg MXP.
	To disable this flag, enter NONE.
G728_IP	Enables or disables declaration of G.728 Audio Algorithm capabilities in IP
	calls.

Range: YES / NO

Default: NO

Polycom®, Inc. 787