Appendix G - Configuring Direct Connections to the Collaboration Server

Collaboration Server (RMX) 4000

2Connect the power cable and power the Collaboration Server On.

3Start the Collaboration Server Web Client application on the workstation, by entering the factory setting Management IP address in the browser’s address line and pressing Enter.

4In the Collaboration Server Web Client Login screen, enter the default Username (POLYCOM) and Password (POLYCOM) and click the Login button.

The Fast Configuration Wizard starts.

For more information about First-time Power-up and the Fast Configuration Wizard see Procedure 1: First-timePower-upin the Polycom RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Getting Started Guide.

5Enter the following parameters using the information supplied by your network administrator:

Control Unit IP Address

Shelf Management IP Address

Control Unit Subnet Mask

Default Router IP Address

6Click the Save & Close button.

The system prompts you to sign in with the new Control Unit IP Address.

7Disconnect the LAN cable between the workstation and the LAN 2 Port on the Collaboration Server’s back panel.

Polycom®, Inc.

974

Page 1005
Image 1005
Polycom 1500/1800/2000/4000 manual Polycom, Inc 974