Appendix I - Polycom Open Collaboration Network (POCN)

RTV 720p

Cisco TelePresence® System (CTS) Versions 1.10

CTS 1300

CTS 3010

The deployment architecture in Single company with Polycom and Cisco Infrastructure - Polycom endpoints using SIP shows a company that has a mixture of Polycom, Cisco and Microsoft endpoints, room systems and telephony equipment that needs to enable multipoint calls between all its video and audio endpoints using the Collaboration Server as the conference bridge.

This solution enables Polycom, Microsoft and Cisco users, each within their own environment, to participate in the same conference running on an MCU.

In the solution described in Single company with Polycom and Cisco Infrastructure - Polycom endpoints using SIP:

DMA is required as all calls are dial-in to Virtual Meeting Rooms (VMR) provisioned on the DMA.

Microsoft and Cisco clients dial the same VMR number to connect to the conference.

Dial- out calls directly from the RMX are not supported.

Lync Clients cannot share content with CTS

SIP trunks are required to the DMA from:

MS Lync as a Static Route.

CUCM

Deployment Architecture:

DMA is required as all calls are dial-in to Virtual Meeting Rooms (VMR) provisioned on the DMA.

Microsoft and Cisco clients dial the same VMR number to connect to the conference.

Dial- out calls are not supported

Lync Clients can not share content with CTS

SIP trunks are required to the DMA from:

MS Lync as a Static Route.

CUCM

For more information, see Cisco TIP Support.

Polycom®, Inc.

1036

Page 1067
Image 1067
Polycom 1500/1800/2000/4000 manual  RTV 720p Cisco TelePresence System CTS Versions  CTS,  Cucm