Polycom 1500/1800/2000/4000 manual Define the following supported parameters

Models: 1500/1800/2000/4000

1 1101
Download 1101 pages 34.66 Kb
Page 130
Image 130

Defining SVC and Mixed CP and SVC Conference Profiles

6Define the following supported parameters:

New SVC Profile - Advanced Parameters

Field/Option

Description

 

 

Encryption

Select the Encryption option for the conference:

 

• Encrypt All - Encryption is enabled for the conference and all conference

 

participants must be encrypted.

 

• No Encryption - Encryption is disabled for the conference.

 

• Encrypt when Possible - enables the negotiation between the MCU and the

 

endpoints and let the MCU connect the participants according to their

 

capabilities, where encryption is the preferred setting. For connection guidelines

 

see Mixing Encrypted and Non-encrypted Endpoints in one Conference.

 

For more information, see Packet Loss Compensation - LPR and DBA.

 

 

Auto Terminate

When selected (default), the conference automatically ends when the termination

 

conditions are met:

 

• Before First Joins — No participant has connected to a conference during the

 

n minutes after it started. Default idle time is 10 minutes.

 

• At the End - After Last participant Quits — All the participants have

 

disconnected from the conference and the conference is idle (empty) for the

 

predefined time period. Default idle time is 1 minute.

 

• At the End - When Last Participant Remains — Only one participant is still

 

connected to the conference for the predefined time period (excluding the

 

recording link which is not considered a participant when this option is selected).

 

It is not recommended to select this option for SVC Conferences. Default idle

 

time is 1 minute.

 

 

Exclusive Content

When selected, Content broadcasting is limited to one participant preventing other

Mode

participants from interrupting the Content broadcasting while it is active. For more

 

details, see

 

 

FW NAT Keep Alive

When selected, a FW NAT Keep Alive message is sent at an interval defined in the

 

field below the check box.

 

 

Interval

The time in seconds between FW NAT Keep Alive messages.

 

 

Polycom®, Inc.

99

Page 130
Image 130
Polycom 1500/1800/2000/4000 manual Define the following supported parameters