Canon 700 manual Subaddress/Password Sending with the Operation Panel Keys

NOTE

•You can adjust the resolution, contrast, and document type for scanning. (See “Adjusting the Scan Settings,” on p. 3-4.)

•You can also specify a sender’s name with [TTI Selector]. (See “Selecting a Sender’s Name,” on p. 3-6.)

3 Specify the destinations using the one-touch speed dialing, coded speed dialing, access code dialing, or directory dialing telephone numbers registered for subaddress/password sending.

For detailed instructions, see “Using Speed Dialing,” on p. 2-32, or “Using Directory Dialing,” on p. 2-39.

Start 4 Press [Start] to start scanning immediately.

Otherwise, the machine waits five or ten seconds before it starts to scan your documents. This timeout feature can be turned ‘OFF’. (See “TX (Send) Settings,” on p. 11-14.)

Subaddress/Password Sending with the Operation Panel Keys

Note the following limitations on entering the subaddress/password when you press [Subaddress] and [Password] on the operation panel:

•If you frequently need to use a subaddress/password to send a document to more than one location, you can register the number, subaddress and password under a one-touch speed dialing key or a coded speed dialing code, and use Sequential Broadcasting. (See “Sequential Broadcasting to More Than One Location,” on p.

3-26.)

•You cannot press [Subaddress] or [Password] for a one-touch or coded speed dialing number that is set for any other type of transmission but ‘REGULAR TX’. (See “Using Speed Dialing,” on p. 2-32.)

•Setting the password is optional, but it is necessary to set the correct password if the other party has set a password for their fax machine.

Follow this procedure to send a document with a subaddress/password entered by pressing [Subaddress] and [Password] on the operation panel.

3

Sending Documents

Sending a Document with a Subaddress/Password 3-33

CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0