Canon 700 Using Regular Dialing, Dial the telephone number using the numeric keys, Press Start

3

Sending Documents

Using Regular Dialing

When you come to a step that requires dialing a number, you can dial the number with the keys on the numeric keypad, just like you would when dialing a telephone number. This is called “regular dialing.”

NOTE

To make dialing easier, register frequently used numbers to the one-touch speed dialing keys or coded speed dialing codes. (See “Using Speed Dialing,” on p. 2-32.)

1 Place your documents on the machine.

For instructions explaining how to place your documents, see “Setting the

Document on the Machine,” on p. 3-3.

NOTE

•You can adjust the resolution, contrast, and document type for scanning. (See “Adjusting the Scan Settings,” on p. 3-4.)

•You can also specify a sender’s name with [TTI Selector]. (See “Selecting a Sender’s Name,” on p. 3-6.)

1	2	3	2 Dial the telephone number using the numeric keys.
4	5	6
7	8	9	NOTE

0

• When entering a number using regular dialing, if you see that you have entered an incorrect digit, press [Delete] to delete the rightmost digit ➞ enter the correct digit.

• You can also use C (Clear) to clear the entire telephone number ➞ begin entering the telephone number again.

•If you notice that you made a mistake while the machine is dialing the number,

press (Stop) to return to the Standby mode ➞ start again.

Start3

Press [Start].

The machine starts scanning the first page into memory.

3-8Using Regular Dialing

CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0