Canon 700 Ecm Tx, Ecm Rx, Energy Saver, Display, Language, Offhook Alarm, Pause Time, Low, Key

Feature	Menu Item		Description of Default
ECM Sending/	ECM TX		The machine is set to conduct all transactions using
Receiving	ECM RX		ECM (Error Correction Mode). If transmission speed
			appears to be extremely slow, you may be able to speed
			up transmission time by turning ECM ‘OFF’. (See “TX
			(Send) Settings,” on p. 11-14, or “RX (Receive)
			Settings,” on p. 11-17.)
Energy Saver	ENERGY SAVER		If the machine remains idle for a specified time period, it
			enters the Energy Saver mode. If your machine is idle
			for three minutes, the machine enters the Energy Saver
			mode. (See Chapter 5, “Summary of Important
			Settings,” in the Reference Guide .)
Language	DISPLAY		The initial display language is English. Spanish, French,
	LANGUAGE		and Portuguese are also available. (See Chapter 5,
			“Summary of Important Settings,” in the Reference
			Guide .)
Manual Receiving	REMOTE RX		To start receiving a fax manually by answering an
with an Extension			extension telephone connected to the machine, dial 25.
Telephone			You can change this number if necessary. (See “RX
			(Receive) Settings,” on p. 11-17.)
Offhook Alarm	OFFHOOK ALARM		If the handset remains off the hook, an alarm sounds.
			The volume of this alarm can be adjusted, or it can be
			turned ‘OFF’. (See “User Settings,” on p. 11-5.)
Pause Length	PAUSE TIME		A pause entered within a number is set for two seconds.
			You can lengthen this pause up to 15 seconds. A pause
			entered at the end of a number is fixed at 10 seconds,
			and cannot be adjusted. (See “TX (Send) Settings,” on
			p. 11-14.)
PIN Codes	PIN CODE		The PIN Code feature is disabled unless you turn it ‘ON’
			and set up the machine for dialing through a PBX
			(Private Branch Exchange) with PIN codes. (See “TX
			(Send) Settings,” on p. 11-14.)
Printing: Continue	TONER SUPPLY		When the toner supply runs low, the machine saves the
Printing with Toner	LOW		remainder of the document in memory. You can set the
Supply Low			machine to continue printing even after the <TONER
			SUPPLY LOW> message appears during printing. (See
			“Printer Settings,” on p. 11-19.)
Printing: Footer on	RX PAGE FOOTER		The machine does not print a footer on every document
Printed Documents			received unless you turn this feature ‘ON’. (See “RX
			(Receive) Settings,” on p. 11-17.)
Program One-Touch	PROG 1-TOUCH		If you press the designated one-touch speed dialing key
Key	KEY		under which a function is assigned before you start a
			transmission, the machine automatically performs that
			function. (See “User Settings,” on p. 11-5.)
Receiving Password	RX PASSWORD		No receiving password is set until you set one. If the
			other party regularly sends you documents only with an
			ITU-T password and no subaddress, set up an RX
			password. (See “System Settings,” on p. 11-29.)
		How the Machine Operates with Default Settings		10-23

Other Special Features

10

CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0