Canon 700 manual Tel=, Relay TX Group

Summary of Important Settings

11

Setting Item	Description
2. RELAY TX GROUP	Sets up a relay box so your machine can relay document
	transmissions to other fax machines in your area. (See “Setting
	Up and Using a Standard Relay Unit,” on p. 6-3.)
1. SETUP FILE	Sets up a relay box.
SET RLY TX GROUP#	00-99
	Sets a two digit relay group number.
1.GROUP DIAL NAME	Give the relay group a name (up to 24 characters).
2.PASSWORD	0-9999999
	Assign a password to protect the relay box settings.
3.TRIGGER	Set the trigger to initiate Relay Broadcasting.
1.SUBADDRESS	Enter an ITU-T subaddress (up to 20 digits).
2.SENDER’S FAX NO.	Enter the telephone number of your machine.
3.MAIL ADDRESS (To)	See the Sending Guide .
	For the LASER CLASS 710, the installation of the optional
	Network Kit III is necessary to access these items.
4.RX PASSWORD	Enter an ITU-T password (up to 20 digits).
5.SELECT ORIG UNIT	Sets your machine to check the incoming relay command to
	make sure the originator is registered.
ON	Receives and obeys incoming relay commands for registered
TEL=	originators only. Register originator machines under one-touch
	speed dialing keys, or coded speed dialing codes.
OFF*	Receives and obeys all incoming relay commands.
6.PRINT RX DOC.	Turns printing ON/OFF for documents received for relay to other
	machines.
ON	Prints a copy of every document relayed.
# OF RX COPIES	From 01 to 99 COPIES; 01 COPIES*
	Set the number of document copies to print.
OFF*	No copies are printed.
7.SELECT LOCATIONS	Use one-touch or coded speed dialing to select the fax numbers
TEL=	that will receive the documents relayed from your machine.

11-24File Settings

CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0