Canon 700 manual Not FOUND, TRY Again, 13-11

NOT FOUND, TRY AGAIN

Cause	The box number you specified does not exist or has not been set up.
Remedy	Try entering a different box number.
NOT REGISTERED
Cause	You pressed a one-touch speed dialing key or [Coded Dial] followed by a three
	digit code, but no telephone number is registered.

Remedy 1 If you have forgotten where the desired telephone number is registered, use directory dialing. (See “Using Directory Dialing,” on p. 2-39.)

Remedy 2 You can also print a list of all numbers registered for speed dialing. (See “Printing the Speed Dialing Lists,” on p. 12-2.)

OUTPUT TRAY FULL

Cause	The output tray is full of paper.
Remedy	Pick up the printed pages in the tray.
PRINT LIMIT REACHED
Cause	Printing has been restricted.
Remedy	Set RESTRICT PRINTING from the DEPT. ID MANAGEMNT menu to ‘OFF’.
	(See Chapter 4, “Restricting the Use of the Machine,” in the Reference Guide.)
PRT ALT. PAPER SIZE? YES=( ) NO=(#)
Cause	The size of the available recording paper loaded in a paper cassette does not
	match the size of the document waiting to be printed.
Remedy	If you do not mind printing the document on a different paper size, press [ ]. If
	you want to print on the correct paper size, press [Stop] ➞ load the correct size
	paper ➞ press [Start].
REC. PAPER JAM
Cause	Paper has jammed in the paper cassette or inside the printer.
Remedy	Clear the paper jam. After clearing the jammed paper, open and close the
	printer cover to reset the printer. (See Chapter 7, “Troubleshooting,” in the
	Reference Guide.)

List of LCD Display Messages (Alphabetical List) 13-11

Troubleshooting

13

CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0