Canon 700 Open all three one-touch speed dialing panels press [Pin Code]., Enter the telephone number using the numeric keys press , Enter the PIN code (up to 20 digits, including , #, and spaces) using the numeric keys., Press [Set].

Setting Up and Using PIN Codes
10-10
10
Other Special Features
CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0
2 Open all three one-touch speed dialing panels ➞ press
[Pin Code].
3 Enter the telephone number using the numeric keys ➞ press
[Set].
NOTE
Repeat steps 2 and 3 for each telephone number in a sequential broadcast. In a
sequential broadcast, you must dial the second destination within five seconds of
dialing the first destination. All subsequent destinations must be specified within 10
seconds of each other. For details about sequential broadcasting, see “Sequential
Broadcasting to More Than One Location,” on p. 3-26.
4 Press [Start].
NOTE
To enter the PIN code immediately, press (Start). Otherwise, the machine waits
five seconds before it displays <ENTER PIN CODE>. This timeout feature can be
turned ‘OFF’. (See “TX (Send) Settings,” on p. 11-14.)
5 Enter the PIN code (up to 20 digits, including , #, and spaces)
using the numeric keys.
The PIN code is not displayed as you enter it.
6 Press [Set].
Transmission starts.
Pin Code
4
1
7
5
2
8
6
3
9
0
Set
Start
4
1
7
5
2
8
6
3
9
0
Set