Canon 700 manual Name, telephone number, and transaction number

Start

3 Specify the destination.

You can specify the destination using regular dialing, one-touch speed dialing, coded speed dialing, access code dialing, group dialing or directory dialing. (See “Using Regular Dialing,” on p. 3-8, “Using Speed Dialing,” on p. 2-32, or “Using Directory Dialing,” on p. 2-39.)

NOTE

•When entering a number using regular dialing, if you see that you have entered an incorrect digit, press [Delete] to delete the rightmost digit ➞ enter the correct digit.

• You can also use C (Clear) to clear the entire telephone number ➞ begin entering the telephone number again.

•If you notice that you made a mistake while the machine is dialing the number,

press	(Stop) to return to the Standby mode ➞ start again.	3
4 Press [Start].		Documents
The machine dials the other party’s number and sends the fax. Each page is sent
as it is scanned.		Sending
A series of messages appear on the LCD display, and report the other party’s

name, telephone number, and transaction number.

Other Party’s Fax

Number

Transaction Number

Other Party’s Name

NOTE

When sending a small-sized document, such as a document of STMT size paper, the document may remain in the automatic document feeder after sending. As a result, this document might be sent again with the next sender’s document. Therefore, when sending a small-sized document, make sure that the document does not remain in the automatic document feeder after sending.

Overview of Sending Methods 3-19

CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0