Canon 700 manual 11-31, Phone NO. Check

Setting Item	Description
3.TIME SETUP	Sets a time for the machine to start the memory receiving operation.
OFF*	The timer for starting and ending the memory receiving operation is
	turned ‘OFF’.
ON	The timer for starting and ending the memory receiving operation is
	turned ‘ON’.
1.START TIME	Set a specified time to start the memory receiving operation.
EVERYDAY*	Set up to five times everyday to start the memory receiving operation.
SELECT DAYS	Select one or several days to start memory receiving. You can set up
	to five times for any of the selected days.
2.END TIME	Set a specified time to end the memory receiving operation.
EVERYDAY*	Set up to five times everyday to end the memory receiving operation.
SELECT DAYS	Select one or several days to end memory receiving. You can set up
	to five times for any of the selected days.
2. RX PASSWORD	Set an RX password to match the ITU-T password of all incoming
	documents.
	Enter an ITU-T password (up to 20 digits). To receive a
	document, this RX password must match the ITU-T password of
	the incoming document.
	After the RX password has been set, all incoming documents
	must have a matching ITU-T password.
3. PHONE NO. CHECK	Enables you to prevent sending a document to an unintended
	destination. The number you dial is checked with the registered
	number. If the numbers match, the document is sent.
OFF*	The number is not checked.
ON	The machine uses the last six digits of the number you dial, and
	matches it with the last six digits of the other party’s number
	registered on the remote machine. If the numbers match, the
	document is sent. Otherwise, the document is not sent.

Summary of Important Settings

11

System Settings 11-31

CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0