Canon 700 manual Time Setup, Start Time, Everyday, Select Days, END Time, # of RX, Copies

Setting	Description
5. TIME SETUP	Sets the time for the machine to enter and leave the
	Transfer mode. If you do not set the timer, you can still
	switch the Transfer mode ON/OFF manually.
1.START TIME	Sets a specified time for the machine to automatically start
	the transfer operation.
EVERYDAY*	Sets the machine to start the transfer operation everyday.You
	can set up to five start times for every day of the week.
SELECT DAYS	1.SUN to 7.SAT
	Sets the machine to start the transfer operation only on
	selected days of the week. You can set up to five start times
	for any of the selected days.
2.END TIME	Sets a specified time for the machine to end the transfer
	operation, and return to normal operations.
EVERYDAY*	Sets the machine to end the transfer operation everyday.
	You can set up to five end times for every day of the week.
SELECT DAYS	1.SUN to 7.SAT
	Sets the machine to end the transfer operation on the
	selected days of the week. You can set up to five end times
	for any day that you select.
6. PRINT RX DOC.	If your machine is the transfer unit, this setting determines if
	your machine prints a copy of every document it transfers.
OFF*	Received and transferred documents are not printed at the
	transfer unit.
ON	A copy of every document received and transferred is
	printed at the transfer unit.
# OF RX	If you turn PRINT RX DOC ‘ON’, use this setting to specify
COPIES	the number of copies you want to print (01 to 99). Use the
	numeric keys to enter the number, or press [▼] or [▲] to
	increase or decrease the number ➞ press [Set].
	Default setting: ‘01COPIES’*

An asterisk (*) indicates the default setting.

Stop 8 Press [Stop] to return to the Standby mode.

Special Sending/Receiving Features

9

Transferring Documents 9-5

CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0