Canon 700 manual Memory Full

Troubleshooting

13

MEMORY FULL

Cause The memory is full.

Remedy 1 If the document has been received in memory, print the document. (See “Printing a Document in Memory,” on p. 9-18.)

Remedy 2 If documents have been received in confidential mailboxes, print them. (See “Receiving a Confidential Document,” on p. 7-10.)

Remedy 3 Check the contents of the memory. If there are unnecessary documents stored in memory, delete them. (See “Erasing a Document from Memory,” on p. 9-22.)

Remedy 4 If you tried to send a document with the ‘Ultra Fine’, ‘Super Fine’, or ‘Text/Photo’ document setting, try using the Direct Sending method, or set the resolution to ‘Fine’ or ‘Text’, and send the document using Memory Sending.

MEMORY FULL PLEASE WAIT

Cause	The memory is full.
Remedy	Wait until the current document transmission is completed. Try sending your
	document again when the current transmission is complete.
NO DOC. STORED
Cause	You tried to check the contents of the memory, but no documents are currently
	stored in memory.
Remedy	Store documents if necessary.

NOT AVAILABLE NOW

Cause 1 You pressed a one-touch speed dialing or [Coded Dial] followed by a three digit code that is not registered for the feature you are trying to use.

Remedy Try again without using the feature, or assign the feature to the one-touch speed dialing key or coded speed dialing code.

Cause 2 When using Manual Sending, you pressed a one-touch speed dialing key or coded speed dialing code under which a group for group dialing has been registered.

Remedy Try sending your document with a one-touch speed dialing key or coded speed dialing code under which a group is not registered.

13-10List of LCD Display Messages (Alphabetical List)

CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0