Canon 700 manual Press or to display the setting you want to change press Set

6

Using a Relay Network

1	2	3
4	5	6
7	8	9
	0

Set

1	2	3
4	5	6
7	8	9
	0

Set

Set

Stop

4 Enter the two digit relay group number that you want to change using the numeric keys ➞ press [Set].

You can also press [▼] or [▲] to select a relay group number.

➞

The prompt <PASSWORD> will be displayed if you have previously set a password. Proceed to step 5. Otherwise, proceed to step 6.

5 Enter the password (up to seven digits) using the numeric keys ➞ press [Set].

If you have not previously set a password, proceed to step 6.

➞

6 Press [▼] or [▲] to display the setting you want to change ➞ press [Set].

To change the settings for an item, follow the same procedure you used for the initial setup of the relay group. (See “Setting Your Machine as a Relay Unit,” on p. 6-3.)

NOTE

• To delete an item, press C (Clear) ➞ Set (Set).

•To turn ‘OFF’ the relay feature for the group and retain the group setup, press [▼] or [▲] to display <10.RELAY B’CAST> ➞ press Set (Set), and turn this feature ‘OFF’. You do not have to delete the relay group to disable it temporarily.

•To change the password for your relay group, you have to first enter the old password (it is not displayed as you enter it) ➞ press Set (Set) ➞ enter a new password (it is displayed as you enter it) ➞ press Set (Set).

7 When you are finished making changes, press [Stop] to return to the Standby mode.

6-8Setting Up and Using a Standard Relay Unit

CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0