Canon 700 manual Advanced Communication

Advanced

Communication

Set

Set

1 2 3

4 5 6

7 8 9

0

Set

NOTE

•You can adjust the resolution, contrast, and document type for scanning. (See “Adjusting the Scan Settings,” on p. 3-4.)

•You can also specify a sender’s name with [TTI Selector]. (See “Selecting a Sender’s Name,” on p. 3-6.)

2 Open all three one-touch speed dialing panels ➞ press [Advanced Communication].

3 Press [▼] or [▲] to display <RELAY> ➞ press [Set].

➞

4 Dial the telephone number of the relay unit ➞ press [Set].

You can specify the destination using regular dialing, one-touch speed dialing, coded speed dialing, access code dialing, or directory dialing. (See “Using Regular Dialing,” on p. 3-8, “Using Speed Dialing,” on p. 2-32, or “Using Directory Dialing,” on p. 2-39.)

➞

5 Enter the ITU-T subaddress required to start the relay broadcast on the other party’s fax machine using the numeric keys ➞ press [Set].

NOTE

You must enter the correct subaddress, including , #, and spaces, set on the other party’s machine. Otherwise, your machine cannot start a relay broadcast.

6

Using a Relay Network

Sending a Document to a Relay Unit for Relay Broadcasting 6-13

CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0