Canon 700 Group Dial Name, Trigger Subaddress, SENDER’S FAX no, RX Password, Select Orig Unit

The SETUP FILE menu includes the following items:

Setting		Description
1.GROUP DIAL NAME	Name (24 characters)
	Enter a name for the relay group. The name can be up to 24
	characters long. Then, press [Set].
2.PASSWORD	0-9999999
	Enter a password (up to seven digits) to protect the relay box settings
	you are about to set up. After you set a password, you will have to
	enter it every time you want to view or change these settings. Enter a
	password, and press [Set].
3.TRIGGER
1.SUBADDRESS	This is the ITU-T subaddress. Enter a number up to 20 digits long (it
	can include spaces and the symbols			and #). The OPTIONAL
	SETTINGS for the speed dialing key or code under which the
	originator fax machine's telephone number is registered must be set to
	‘OFF’.
2.SENDER’S FAX NO.	Enter the sender’s telephone number using one-touch or coded speed
	dialing.
3.MAIL ADDRESS(To)	See the Sending Guide .
	For the LASER CLASS 710, the installation of the optional Network Kit
	III is necessary to access these items.
4.RX PASSWORD	20 digits (	, #, spaces)
	If your machine is the relay unit, this ITU-T password must match the
	ITU-T password of the document sent from the originator in order for
	your machine to receive the document. Otherwise, your machine will
	not receive the document. Enter a number up to 20 digits long (it can
	include spaces and the symbols		and #).
5.SELECT ORIG UNIT	If your machine is the relay unit, this feature forces your machine to
	check the identity of the originator before it receives the document,
	and relays it to other fax machines.
ON	If your machine receives a document for relay, it will check the identity
	of the originator before it receives the document. In order for this
	feature to perform correctly, the telephone number of the originator
	unit must be registered for speed dialing on your machine.
TEL =	Press the one-touch speed dialing key, or press [Coded Dial] followed
	by the three digit code where the number for the originator machine is
	registered ➞ press [Set].
OFF*	Your machine will receive a document for relay without checking the
	identity of the originator.
6.PRINT RX DOC.	If your machine is the relay unit, this setting determines if your
	machine prints a copy of every document that it relays.

6

Using a Relay Network

Setting Up and Using a Standard Relay Unit 6-5

CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0