Canon 700 manual Receiving Documents

Troubleshooting

13

Receiving Documents

Cannot receive documents automatically.

Cause	<MAN.> is displayed.
Remedy	Set RECEIVE MODE to ‘AUTO RX’ from the RX SETTINGS menu. (See
	Chapter 4, “Receiving Documents.”)

Cannot receive documents manually.

Cause 1 There is a document set in the ADF (Automatic Document Feeder).

Remedy	You cannot receive if there is a document set in the Automatic Document
	Feeder. Remove the document and try again.
Cause 2	<AUTO> is displayed.
Remedy	Set the RECEIVE MODE to ‘MANUAL RX’ in the RX SETTINGS menu. (See
	“Receiving Documents Manually,” on p. 4-4.)
Cause 3	You pressed [Start] after you hung up the handset.
Remedy	When you hear a high pitched tone, press [Start] before you hang up the
	handset. Review the procedure for manual receiving with the optional handset
	kit installed on the machine. (See “Receiving Documents Manually,” on p. 4-4.)

The documents you receive are of poor quality.

Cause 1 Your toner cartridge is running low on toner.

Remedy Remove your toner cartridge and rotate it five or six times to evenly distribute the remaining toner, and try receiving the document again. If this does not solve the problem, you should change the toner cartridge. (See Chapter 6, “Maintenance,” in the Reference Guide.)

Cause 2 The other fax machine is not functioning properly.

Remedy The sending fax machine usually determines the image quality. Try copying a document on your own machine. If the copy is clean, then the other fax machine has a problem. Call the other party and ask them to clean the scanning glass on their fax machine.

Cannot receive a confidential document in your confidential mailbox.

Cause	The other party’s fax machine does not support ITU-T subaddress/password
	transactions.

13-18When Trouble Occurs

CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0