Password Settings
Use this section to configure the 2 password accounts and idle time-out setting for your Barricade Router. There are 2 levels of admin access for this VPN Router:
The Administrator account has Read/Write permission to view and change any settings. The default password for this account is "smcadmin".
The User account has Read-Only permissions to view but not change the settings. The default password for this account is "password".
Remote Management
Use this section to configure the remote management feature of your Barricade Router so the web-management can be accessed from the Internet (WAN). You can restrict access to a single IP or a range of IP addresses. If the specified IP address is 0.0.0.0, any host can connect to the router to perform these tasks. You can use the subnet mask bits’ /nn notation to specify a group of trusted IP addresses. For example, 10.1.2.0/24. You can also change the remote port that the administrator uses to gain access to the web management.
