VPN Settings – Tunnel 1 – Set IPSec Proposal
Set the Tunnel 1 IPSec Proposal settings as follows:
ID: | 1 |
Proposal Name: | 1 |
DH Group: | Group2 |
Encap. protocol: | ESP |
Encrypt. algorithm: | DES |
Auth. Algorithm: | MD5 |
Life Time: | 10000 |
Life Time Unit: | Sec. |
When finished, save the settings.
Now to view the VPN connection process, go to the STATUS page and view the System Log. Now PC1, with IP 192.168.1.100 has access to PC2, with IP 192.168.2.100
8.2 Tunnel between a SMCBR14VPN and standalone client.
Alternatively, a tunnel can be established between a PC and SMCBR14VPN. The easiest way to this is to use an IPSEC VPN client software running at the PC. After configuring the client accordingly, the only change to the configuration is the remote mask, which in this case would be 255.255.255.255, as we are configuring a tunnel for only one client. If clients are connecting from various IPs, dynamic VPN is a good solution for this.
53
