Linksys USB300M manual Wake Up Set this to Disable

Chapter 2

Configuration

6.The Wizard installs the driver software onto your computer. When the installation is completed, click Next.

Installing the Software

7.The Completing the Found New Hardware Wizard screen appears. Click Finish to exit the Wizard. Then remove the Installation CD from the CD-ROM drive.

Completing the Found New Hardware Wizard

8.Click Start, click Control Panel, and then click System to open the Device Manager.

Device Manager

9.Click Network Adapters, and then double-click ASIX AX88772 USB2.0 to Fast Ethernet Adapter to display the Adapter’s Properties window.

Fast Ethernet Adapter Properties—General tab

10.Click the Advanced tab, and then use the Property and Value drop-down menus to set the properties as follows.

Connection Type  Set this to AutoSense. Flow Control  Set this to Enable.

Wake Up  Set this to Disable.

Fast Ethernet Adapter Properties—Advanced tab

USB Ethernet Adapter 5