AVE VSI-PRO Appendix G, Vsib Installation, Vsib DB-9M VSI-Pro DB-9M, Txd Rxd Rts Cts Gnd

APPENDIX G VSIB INSTALLATION

VSIB for Thai, Korean or Chinese Languages

The VSIB is a bit-mapped display device that can display Thai, Korean, or Chinese characters. This device works in conjunction with the VSI-Pro. A special cable is connected between the VSI-Pro and the VSIB so all on-screen programming is done via the VSIB but the controls and menus are the same as the VSI-Pro. Therefore after connec- tion, the programming will be identical to this manual. The VSIB must be ordered independently for any of the above supported languages and the language must be specified.

Figure 1F: VSI-Pro Front Panel Figure 2F: VSIB Front Panel

Figure 3F: VSIB Rear Panel

Disconnect the stan- dard VSI-Pro and plug its cable into the female connector of the Triport.

Serial Input Power Video Input Video Output

Figure 4F: VSIB Connection Cables

The pin-out for the VSIB between the VSI-Pro and the VSIB is as follows:

VSIB ( DB-9M )	VSI-Pro ( DB-9M )
TXD 3		2 RXD
RTS 7		8 CTS
GND 5		5 GND

Use the BNC connectors of the VSIB for your Video Input

&Output

Figure 5F: Cable Connection to VSIB

Figure 6F: Pin-Out for VSIB to VSI-Pro

VSI-Pro VIDEO SERIAL INTERFACE

66