Error Information Screen

This window opens when the Error command is used. It displays the FAL, FCU, and system error codes/messages.

Error information

FCU error:

FAL error:

System error:

( 0 )

( 0 )

( 0 )

Close

Figure 4-6 Error Information Display

FCU for Windows

FCU Version and Copyright Dialog

To start the FCU GUI program for Windows 2000/2003/Windows NT systems:

1.Log on with Administrator access privileges.

2.Start the FCU GUI as follows: Click Start-Programs-FCU-FCU, or open the c:\ folder and double-click on FCU, or create a shortcut for FCU on the desktop.

Note: Do not start FCU by dragging and dropping an FCU parameter definition file on the FCU program icon. FCU program operation cannot be guaranteed.

3.If you want to specify any of the FCU options, start FCU from the command line (DOS prompt) as follows: Go to the FCU directory (containing fcu.exe and datasetmount.dat), and enter fcu [-nc][-cl] [param]

The -ncoption is the same as for UNIX: All specified FX operations are performed without confirmation of FCU parameters or FXmto target file overwrites.

The -cloption specifies that all FCU log files will be cleared before starting. The param option is the same as for UNIX:

If you want to open a new untitled FCU parameter definition file when you start FCU, leave the param option blank.

If you want to load an FCU parameter definition file when you start FCU, enter the file name with complete path if the file is not in the current directory.

4-10

Using the Cross-OS file Exchange Software

Hitachi USP V Cross-OS File Exchange User’s Guide

Page 104
Image 104
Hitachi MK-96RD647-01 manual FCU for Windows, Error Information Screen, FCU Version and Copyright Dialog