13.FCU does not load the next operation automatically. To perform another FX operation, select the desired Parameter-Loadcommand, and repeat steps

(8) through (12). To exit FCU, select the File-Exitcommand.

Note: After an FXotm file transfer from Windows 2000/2003/Windows NT systems, there will be a delay before you can access the FX volume. The length of delay varies according to individual server performance.

Note: After you expand open volumes (LUSE), you will need to reboot Windows 2000/2003/Windows NT systems.

Note: Do not use the open system host to access an FX volume. Use only FAL to access FX volumes. This applies to PC server platforms (e.g., NT) and UNIX- based systems.

The Cancel button changes to Close after the operation is complete.

Figure 5-7 Execute Panel Showing Normal End

The Cancel button changes to Close after the operation is canceled.

Figure 5-8 Execute Panel Showing Canceled Operation

Figure 5-9 Execute Panel Showing Error End

The Cancel button changes to Close after the operation ends abnormally.

5-22

Performing Cross-Os File Exchange Operations

Hitachi USP V Cross-OS File Exchange User’s Guide

Page 148
Image 148
Hitachi MK-96RD647-01 manual Execute Panel Showing Normal End