Hitachi MK-96RD647-01 manual Parameter Line Dialog, Execute Dialogs

Parameter Line Dialog

The View-Parameter line… command opens the Parameter Line panel, which displays the current line (parameter set) in the current FCU parameter definition file.

The Parameter menu provides access to the following FCU functions:

•The Parameter-Loadcommand loads the Previous, Next, Top, and Bottom parameter lines from the current FCU parameter definition file. The FCU main panel status bar updates the current line number when any Parameter-Loadcommand is executed.

•The Parameter-Savecommand allows you to either Insert the parameter set being displayed into the current FCU parameter definition file, or Replace the current parameter set (previously loaded) with the parameter set being displayed. If you do not select this command, your parameter changes will not be saved.

Note: This command does not save the current FCU parameter definition file (you must use File-Save/Save As).

•The Parameter-Deletecommand deletes the current parameter set from the current FCU parameter definition file. The line is not permanently deleted until you save the current FCU parameter definition file using the File-Savecommand.

•The Parameter-Wipecommand clears all FCU initiation parameters displayed on screen, so that you can input new parameters easily. This command does not delete the current parameter set.

Figure 4-12 Parameter Line Panel

Execute Dialogs

After selection the desired operation on the FCU Main window, the Execute button at the bottom of the window is enabled. Click Execute to start the selected operation. (If the Execute button is not enabled, you have not saved the current parameter set.)

4-18 Using the Cross-OS file Exchange Software

Hitachi USP V Cross-OS File Exchange User’s Guide