Hitachi MK-96RD647-01 manual

•The File-Savecommand (Ctrl+S) saves the current FCU parameter definition file. Deleted and replaced lines are discarded, inserted lines are added, and all lines after end are discarded.

Note: This command does not save the current parameter set.

•The File-Save As… command saves the current FCU parameter definition file with a different file name and/or location.

•The File-Exitcommand (Ctrl+X) exits the FCU software.

The Edit menu is reserved for future enhancement and is not yet enabled.

The Parameter menu provides access to the following FCU functions:

•The Parameter-Loadcommand loads the Previous, Next, Top, and Bottom parameter lines from the current FCU parameter definition file. The FCU main panel status bar updates the current line number when any Parameter-Loadcommand is executed.

•The Parameter-Savecommand allows you to either Insert the parameter set being displayed into the current FCU parameter definition file, or Replace the current parameter set (previously loaded) with the parameter set being displayed. If you do not select this command, your parameter changes will not be saved.

Note: This command does not save the current FCU parameter definition file (you must use File-Save/Save As).

•The Parameter-Deletecommand deletes the current parameter set from the current FCU parameter definition file. The line is not permanently deleted until you save the current FCU parameter definition file using the File-Savecommand.

•The Parameter-Wipecommand clears all FCU initiation parameters displayed on screen, so that you can input new parameters easily. This command does not delete the current parameter set.

The View menu provides access to the following FCU functions:

•The View-Toolbarand View-Status bar commands display/hide the FCU toolbar and status bar.

•The View-Volume information… command opens the FCU Volume Information panel, which displays the contents of the FX volume definition file.

•The View-MF-file information… command displays the following information for the mainframe (MF) files (datasets) in the volume specified in the Mainframe file field on the FCU main panel.

•The View-Option…command opens the Option panel, which allows you to view/change the FCU file transfer options.

•The View-Error information… command opens the Error Information panel.

Using the Cross-Os File Exchange Software 4-13

Hitachi USP V Cross-OS File Exchange User’s Guide