Hitachi MK-96RD647-01 manual File Menu Commands

File Menu Commands

The File menu provides access to the following FCU functions:

•Load. This command loads the parameter sets from the specified FCU parameter definition file onto the FCU main panel. Each time you select Load, the next set of parameters is loaded. If you enter a file name in the Parameter File field, the Load command opens the file and loads the first parameter set (or creates the new file). If the FCU parameter definition file is empty or was not found, FCU ignores this command.

•Save. This command saves the FCU parameter definition file. If no FCU parameter set was previously loaded, the current parameter set is added to the file. If a parameter set was previously loaded and you made changes, the current parameter set overwrites and replaces the previously loaded parameter set. If you make changes and do not select Save, FCU will discard your changes when you select Load or Exit.

•Delete. This command deletes the currently loaded parameter set from the FCU parameter definition file. If the FCU parameter definition file does not yet exist or does not contain the parameter set on screen, FCU ignores this command.

•Exit. This command closes the current FCU parameter definition file (unsaved changes are discarded), and then closes the FCU program.

Help Menu Commands

The Help menu provides access to the following FCU functions.

Note: When installing FX Code Converter, the Edit_prm menu is displayed, and the parameters for FX Code Converter can be displayed.

•Volume. This command displays the contents of the FX volume definition file, so that you can verify that the FX volumes are properly defined.

•MF-File. This command displays the dataset information for each dataset in the specified mainframe (MF) volume. The VSN must be entered in the Input File field (for FXmto) or Output File field (for FXotm) on the FCU main panel.

–Dataset name: An asterisk (*) before the dataset name indicates that FAL/FCU can process the dataset. A dash (-) indicates that FAL/FCU cannot process the dataset. A question mark (?) indicates that FCU can process the dataset only if the VSE record option is used to specify the RF, RL, and BL.

–Dataset organization (DO) type: SAM, DAM, PAM, VSAM, ??? = unknown.

–Record format (RF): F = fixed length, V = variable length, U = undefined length, S = spanned record, ? = unknown.

–Block length (BL): in bytes

–Record length (RL): in bytes

4-8 Using the Cross-OS file Exchange Software

Hitachi USP V Cross-OS File Exchange User’s Guide