Hitachi MK-96RD647-01 manual

–If other values outside the range are given, the default value applies.

•Retry Wait Time Function:You can set the wait time interval by specifying the environment variable(FAL_RETRY_WAIT_TIME). FX attempts to send data during reserved status.

–The default is 1 second, where no definition of the environment variable is given.

–The range of the FAL_RETRY_WAIT_TIME variable is 1-60 seconds.

–If other values outside the range are given, the default value applies.

•Retry target function: You can set system error codes, which are retry triggers, by specifying the environment variable (FAL_RETRY_TARGET).

–You can set up to 5 system error codes separated by commas. If you set six or more system error codes, FX will ignore all after the fifth.

–If no environment variable definition is given, an error code 16(EBUSY) will appear.

–You can set up to 5 system error codes, separated by commas.

–If other values outside the range are given, the 16(EBUSY) error code applies.

–For setting error codes outside default values, please contact your Hitachi Data Systems technical representative.

About Cross-OS File Exchange Operations 2-35

Hitachi USP V Cross-OS File Exchange User’s Guide