Hitachi MK-96RD647-01 manual Bit FAL/FCU Software

64-Bit FAL/FCU Software

To install the 64bitFAL/FCU software on a UNIX-based platform:

1.Log-in as "root".

2.Set CD-ROM, in which the 64bitFAL/FCU is stored, to the drive.

3.Mount it.

4.Check to see if the following directories currently exist. If they do not, create them as follows:

a.All Platforms: /usr, /usr/lib

b.Solaris: /usr/lib/sparcv9

c.HP-UX: /usr/lib/pa20_64

5.Move to the root directory

6.Copy 64bitFAL from CD-ROM

7.A file or directory can be viewed using the correct file name given at mounting. To view a directory, use one of the following procedures according to platform:

d.Install 64bitFAL after confirming a directory name and a file name by using the ls command.

–HP-UX (11.0):

#cpio -iBmuv <(MountPoint)/PROGRAM/FAL64/HP_UX/HP_UX.CPI

–Solaris (Solaris 7,8, 9):

#cpio -iBmuv (MountPoint)/PROGRAM/FAL64/SOLARIS/SOLARIS.CPI

–AIX (AIX 4.3.3 ):

#cpio -iBmuv <(MountPoint)/PROGRAM/FAL64/AIX/AIX4/AIX.CPI

–Red Hat Linux AS3.0/IA64:

#cpio -iBmuv <(MountPoint)/PROGRAM/FAL64/LINUX/LINUX.CPI

8.Remove the CD-ROM from the drive.

9.Log-out once and log-in again

3-18 Preparing for Cross-OS File Exchange Operations

Hitachi USP V Cross-OS File Exchange User’s Guide