Hitachi MK-96RD647-01 manual 206, Padding parameter to No, RDW error Delimiter not, Parameters

Error		Error Message and Description	Recommended Action(s)
Code
-206		RDW error: PADDING not supported	Padding cannot be processed when RDW=Yes. Change the
		Padding is not specified as No	padding parameter to No.
		when RDW=Yes.
-207		RDW error: DELIMITER not	Delimiters cannot be processed when RDW=Yes. Change
		supported	the delimiter parameter to No.
		Delimiter is not specified as No
		when RDW=Yes.
-210	Parameter file: Comment line		If you specify Load, FCU will move to the next line. You can
		This is a comment line in the	also replace the comment line with a valid parameter.
		parameter file.
-220		Parameter: VSE select error	Make sure that the number of VSE parameters is correct and
		The VSE parameter format is not	that a comma is used correctly to separate the VSE
			parameters.
		correct.
-221		Parameter: VSE record format error	Make sure that the record format is set to either one of
		Record format in the VSE	F/FB/V/VB.
		parameter is not correct.
-222		Parameter: VSE record length error	Make sure that the record length is set to the correct value
		Record length in the VSE	within the extent allowed.
		parameter is not correct.
-223		Parameter: VSE block length error	Make sure that the block length is set to the correct value
		Block length in the VSE	within the extent allowed.
		parameter is not correct.
-230		No code conv. table file: No code	Make sure that the code conversion table file name is correct
		conv. table	and that the file exists. This error may also be reported if you
		The code conversion table was	mix mainframe and OPEN-x devices in the same FX volume
			definition file.
		not found.
-231		Code conv. table: Open error	Refer to the OS user manuals for assistance.
		The code conversion table could
		not be opened.
-233		Code conv. table: Close error	Refer to the OS user manuals for assistance.
		The code conversion table could
		not be closed.
-234	Code conv. table: Get file data error		Check the contents of the file. Refer to the OS user manuals
		The size of the code conversion	for assistance.
		table could not be obtained.
-235		Code conv. table: File size error	Make sure that the size of the code conversion table is 256
		The size of the code conv table is	bytes.
		not correct.
-236		Code conv. table function: Invalid	Check the contents of the input file, especially the delimiters.
		argument
		No source data to be converted
		was found.
-238		Code conv. table name: No data	If you do not specify EA or No for the code conversion
		The file name of the code	option, make sure to specify the correct file name of your
			code conversion table.
		conversion table is not specified.

7-12Troubleshooting

Hitachi USP V Cross-OS File Exchange User’s Guide