Hitachi MK-96RD647-01 manual FCU Error Codes for Windows Systems

FCU Error Codes for Windows Systems

If FCU for Windows 2000/2003/Windows NT systems reports an error, use the View-Error information… command to view the most recent error. FCU for Windows 2000/2003/Windows NT systems also logs errors in the FCU log file (e.g., fcudata.prm.log). Table 7-4lists and describes the FCU error codes for Windows 2000/Windows NT systems and provides instructions for resolving each error condition.

Note: Error codes with a plus value are system errors. Windows 2000/2003/Windows NT systems system error codes are defined in the errno.h file attached with Microsoft Visual C++®.

Table 7-4FCU Error Codes for Windows 2000/2003/Windows NT Systems

	Error	Error Message and Description	Recommended Action(s)
	Code
	-100	Parameter definition file: Open error	Make sure that the parameter definition file was created
		An error occurred when opening the	correctly. If the parameter definition file was created
			correctly, check the system error.
		parameter definition file.
	-101	Parameter: Count error	Make sure that the parameter count is correct.
		An error is detected in the parameter count.
	-102	Parameter: Direction error	Make sure that the direction is specified correctly as mto
		The data transfer direction is not correct.	or otm.
	-103	Parameter: Mainframe file name error	Make sure that the mainframe file name is set correctly.
		Mainframe file name is not correct.
	-104	Parameter: Open system file name error	Make sure that the open system file name is set correctly.
		Open system file name is not correct.
	-105	Parameter: Code conversion error	Make sure that the code conversion option is specified as
		Code conversion setting is not correct.	EA, EcA, No, or File_name (of your code conversion
			table). This error may also be reported if you mix
			3390/3380 and OPEN-x devices in the same FX volume
			definition file.
	-106	Parameter: Padding error	Make sure that the padding option is specified as Yes or
		Padding setting is not correct.	No.
	-107	Parameter: Delimiter error	Make sure that the delimiter option is specified as CRLF or
		Delimiter setting is not correct.	No.
	-108	Parameter: Add parameter error	If you are adding delimiters for Windows
		Delimiter setting is not correct.	2000/2003/Windows NT systems, make sure that the
			delimiter option is specified as CRLF (not just CR or LF).
	-109	Parameter: Empty duplication error	Specify only one empty setting.
		More than one empty setting is specified.
	-110	Parameter: RDW duplication error	Specify only one RDW setting.
		More than one RDW setting is specified.
	-120	Volume definition file: Open error	Make sure that the volume definition file was created
		An error is detected when opening the volume definition	correctly. If the volume definition file is correct, check the
		file.	system error.
7-16		Troubleshooting

Hitachi USP V Cross-OS File Exchange User’s Guide