Hitachi MK-96RD647-01 manual Error Information Dialog, Execute Panel Showing Error End

If an error occurred, the Error information panel opens automatically to display the error). If there is an error during execution the panel below will be displayed. You should check that your parameters hae been entered correctly and try executing the command again. See Appendix C for further information on errors.

The Cancel button changes to Close after the operation is canceled.

Figure 4-15 Execute Panel Showing Error End

Note: FCU does not load the next operation automatically. To perform another FX operation, select the desired Parameter-Loadcommand, and repeat steps

(8)through (12) as shown in Section File Conversion Utility Window. To exit FCU, select the File-Exitcommand.

Error Information Dialog

The View-Error information… command opens the Error Information panel, which displays the most recent error information (error code and message) for FCU, FAL, and system errors.

Figure 4-16 Error Information Panel

4-20 Using the Cross-OS file Exchange Software

Hitachi USP V Cross-OS File Exchange User’s Guide