Hitachi MK-96RD647-01 manual Volume definition file Length error, Dataset Information get error

-121	Volume definition file : Length error
	The record length in the volume definition file is too long.
-124	Volume definition: Emulation type Length error
	An emulation type parameter in the volume
	definition file is too long.
-125	Volume definition: MFtype Length error.
	Incorrect
	Ftype is specified in the volume definition file.
-126	Volume definition: VSN identification length
	error.
	The VSN identification length in the volume
	definition file is too long.
-130	Dataset: No dataset error
	No dataset is found.
-131	Dataset: Search error
	An error is detected in searching the dataset.
-132	Dataset: Information get error
	An error is detected in acquiring dataset
	information.
-133	Dataset: Organization error
	The specified dataset org. type is not correct.
-134	Dataset: Record format error
	The specified record format is not correct.
-135	Dataset: Block length error
	The specified block length is not correct.
-136	Dataset: Record length error
	The specified record length is not correct.
-137	Dataset: Dataset size error
	The specified dataset size is not correct.
-138	Dataset: Close error
	An error is detected during close operation.
-150	Mainframe file: Open error
	An error is detected when opening the
	mainframe file.
-151	Mainframe file: Read error
	An error is detected during reading data
	from the mainframe file.
-152	Mainframe file: Write error
	An error is detected when writing data into
	the mainframe file.
-153	Mainframe file: Close error
	An error is detected when closing the
	mainframe file.

Specify the record length less than 2080 characters (not including delimiter).

Specify an emulation type parameter less than 11 characters.

Specified MFN or MFA in MFtype of the volume definition file.

Specify the VSN identification length than 35 characters.

Make sure that the mainframe name is specified correctly, or that the dataset is allocated correctly on the specified volume.

Make sure that the volume definition file name is specified correctly, or that the mainframe file name is specified correctly.

Make sure that the volume definition file name is specified correctly, or that the mainframe file name is specified correctly.

Make sure that the dataset organization type is specified correctly.

Make sure that the record format is specified correctly.

Make sure that the block length is specified correctly.

Make sure that the record length is specified correctly.

Make sure that the dataset size is specified correctly.

Check the FAL error code and system error code.

Check the FAL error code and system error code.

Check the FAL error code and system error code.

Check the FAL error code and system error code.

Check the FAL error code and system error code.

Troubleshooting 7-17

Hitachi USP V Cross-OS File Exchange User’s Guide