Hitachi MK-96RD647-01 Installing the FAL/FCU Software, Installing FAL/FCU on UNIX-Based Platforms

Installing the FAL/FCU Software

The FAL/FCU software must be installed on the UNIX/NT server(s) attached to the subsystem. FAL/FCU software installation for the UNIX-based platforms is different from FAL/FCU installation on Windows 2000/2003/Windows NT. The following sections provide instructions for installing FAL/FCU version 01-01- 36/38 or later. For instructions on installing versions 01-01-24 and earlier, please refer to previous revisions of this document.

Installing FAL/FCU on UNIX-Based Platforms

32-Bit FAL/FCU Software

To install the 32-bit FAL/FCU software on a UNIX-based platform:

1.If FAL/FCU version 01-01-36 or later is already installed (by cpio command), you do not need to uninstall it. A new installation will overwrite the previous version.

If FAL/FCU version 01-01-24 or earlier is already installed (by setup program), you must uninstall this older version as follows before installing version 01-01-36 or later:

a)Log in with the same user ID that was used to install the old FAL/FCU software.

b)If FAL/FCU was installed from FD using the setup program, see Uninstallation to remove FAL/FCU.

c)If FAL/FCU was installed from DAT, or if you can’t find your FAL/FCU installation FD, move to the directory fcu/fal.o/dataset.h and remove FAL/FCU by entering:

#rm fcu fal.o dataset.h $HOME/FcuMf

If you cannot find the directory, you can use the following procedure:

#find / -name “fcu” -print

#find / -name “fal.o” -print

#find / -name “dataset.h” -print

#find / -name “FcuMf” -print

2.Log in to the system as root.

3.Insert the FAL/FCU installation media (e.g., CD-ROM) into the drive.

Note: Verify that the device file for the CD-ROM drive exists. For Solaris, do not use volcheck if the CD-ROM device file is not available for auto- mount.

Preparing for Cross-OS File Exchange Operations 3-15

Hitachi USP V Cross-OS File Exchange User’s Guide