Hitachi MK-96RD647-01 manual FCU for Unix, FCU Version and Copyright Screen

FCU for UNIX

The FCU GUI enables you to perform FX file transfer operations interactively and provides access to detailed information on the datasets/files in the specified FX source volume/directory. The FCU GUI displays the FX operations in the FCU parameter definition file (if specified), allows you to modify the FCU parameter definition file interactively, and also allows you to enter FCU parameters and perform FX operations manually. The FCU GUI also displays the error information for FX operations.

FCU Version and Copyright Screen

To start the FCU GUI program for UNIX -based platforms:

1. At the UNIX command line prompt, enter: fcu [-nc] [param]

The -ncoption (nc = no checking) tells FCU to execute all specified FX operations without requesting confirmation for FCU parameters or checking for existing FXmto target files. If you want to bypass these confirmations, enter -nc.

The param option tells FCU whether to use the FCU parameter definition file or a specific FCU initiation parameter set to perform FX operations. The param option must have one of the following three values:

–[blank]. If you want to use the default FCU parameter definition file

(fcudata.param in the current directory), leave the param option blank (do not enter anything).

–file_name. If you want to use a different FCU parameter definition file, enter the file name with complete path (absolute or relative) if not in the current directory.

–-P + parameters. If you want to perform one specific FX operation, enter -Pfollowed by the FCU initiation parameter set (e.g., mto VSN:dataset targetfile No No No) for the desired FX operation. The -Poption requires the -ncoption.

For example:

–If you want to use the default FCU parameter definition file and check the parameters and FXmto target files, enter: fcu

–If you want to use the default FCU parameter definition file and perform all operations without checking parameters or FXmto target files, enter: fcu -nc

–If you want to use a different FCU parameter definition file and perform all operations without checking parameters or FXmto target files, enter: fcu - nc filename

–If you want to perform one specific FX operation, enter: fcu -nc-P [parameters]

4-2 Using the Cross-OS file Exchange Software

Hitachi USP V Cross-OS File Exchange User’s Guide