7.For Solaris you must set a path to the resource file for each FAL/FCU user:

a)For C shell, add the following line to the end of the .cshrc file in the home directory. If .cshrc does not exist, create it and enter the following line:

setenv XFILESEARCHPATH /usr/lib/X11/app- defaults/%N:$XFILESEARCHPATH

export XFILESEARCHPATH

Note: Add these two lines to the file “.profile” in your home directory, when it is not in the common desktop environment. If “.profile” does not exist, create it.

b)For non-C shell, add the following two lines to the end of the .dtprofile file in the home directory. If .dtprofile does not exist, create it and enter the following lines:

XFILESEARCHPATH=/usr/lib/X11/app- defaults/%N:$XFILESEARCHPATH export XFILESEARCHPATH

c)You must log out and log back in to implement these changes.

8.For Tru64 UNIX you must uncompress the FAL/FCU program:

#uncompress /usr/bin/fcu.Z

9.Remove the CD-ROM from the drive.

10.Log out, and then log in again.

Note: When the FX Code Converter is installed, the libuoc.* file is replaced with the FX Code Converter library (the extension varies according to OS). Before installing FX Code Converter, save libuoc.* with an alias.

Preparing for Cross-OS File Exchange Operations

3-17

Hitachi USP V Cross-OS File Exchange User’s Guide

Page 73
Image 73
Hitachi MK-96RD647-01 manual # uncompress /usr/bin/fcu.Z