![Operation](/images/new-backgrounds/33594/3359419x1.webp)
Operation
IMPORTANT
Fan installation must be completed, including the installation of the fan blades, before testing of the remote control.
Your remote control has full control of your fan and lights.
NOTE: Prior to operation of the down light from the remote control, make sure the switch on the light is ON.
1.To set the desired fan speed, press the HI, MED, or LOW button to operate your fan on high, medium, or low speed.
2.To turn your fan off, press the OFF button.
3.To change the airflow direction of the fan blades, press the REV button.
4.To turn the downlight on, press and release the D/L button. The light will turn on at the light intensity previously selected.
5.To turn the uplight on, press and release the U/L button. The light will turn on at the light intensity previously selected.
6.To vary the intensity of the light, hold the U/L or D/L button down until the desired light intensity is reached, then release the button.
Installation of
Storage Bracket
A storage bracket is supplied with the remote control for holding the control unit when not in use. If you desire to use the bracket, use the two screws (supplied) and install it on a wall that is away from excess heat or humidity.
Maintenance
IMPORTANT CARE INSTRUCTIONS
for your Ceiling Fan
Periodic cleaning of your new ceiling fan is the only maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth to avoid scratching the finish.
Abrasive cleaning agents are not required and should be avoided to prevent damage to finish.
!WARNING
Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and create the possibility of an electrical shock.
HI
UL
MED |
|
REV | LOW |
|
OFF DL
STORAGE
BRACKET
®
Accessories
1.Ceiling Fan Light Kits (see store or catalog).
2.Downrod Extension Kits (see store or catalog).
!WARNING
The use of any other control not specifically approved for this fan could result in fire, shock and personal injury.
!WARNING
This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Company. Substitution of parts or acces- sories not designated for use with this product by Emerson Company could result in personal injury or property damage.
10