HTML Configuration Forms Will Not Display
135
•If you look at the back of the printer, is the STAT LED flashing
once a second, or is it quicker than that? A slower, once-a-
second rate indicates that the print server is in fact configured
with an IP address. A faster rate means it knows nothing about
this, so you may need to try the configuration process again.
•Have you confirmed that the network connection to the
Ethernet Interface is working correctly? Trying different network
cables and locations will help narrow down the problem.
•For wireless NIC, is the SSID correct? Is the operation mode
correct?
HTML Configuration Forms Will Not Display•Can you ping the Ethernet Interface from the Windows
station? If not, refer to “Ethernet Interface Cannot Be Found On
The Network” on page 134.
•Have you used the correct URL for the Ethernet Interface home
page? It should be
http://EthernetInterfaceIPaddress
(e.g., http://192.75.11.9).
•Is HTTP support enabled? If not, refer to “Web Browser/HTTP
Problem” on page 139.
Errors Occur When Defining An LPR Printer•Can you ping the Ethernet Interface from your Windows NT
station? If not, please refer to “Ethernet Interface Cannot Be
Found On The Network” on page 134.
•Did you specify the correct IP address or host name for the
Ethernet Interface in the first field of the “Add LPR Compatible
Printer” box?
•Did you specify a valid destination/queue on the Ethernet
Interface in the second field of the “Add LPR Compatible
Printer” dialogue box? If so, did you also enter it in lowercase
letters?