IBM 6500 manual Onlcr, Descramble, Xtab

Set Commands

set logpath from stored

Set all current logpath settings to the values stored in flash memory.

set model <model> name <new_name> Example: set model m1 name landscape

Change the current name of the model <model> to a new name as indicated by <new_name>. These names are case sensitive.

set model <model> type raw Example: set model m2 type raw

Set the model type to raw so that it does not process the data passing through it in any way.

set model <model> banner [text] [after] Example: set model m2 banner text

Determine whether a banner page should be added for print jobs passing through the model <model> mapped destination/ queue. By default, banner pages are added to the front of the job. If after is set, the banner page will come at the end.

set model <model> stty [[-]onlcr] [[-]descramble] [xtab <1-6>none]

Example: set model m3 stty onlcr

Control extra job processing done by the model. The processing options are:

onlcr	Carriage return insertion for Unix text jobs.
	Adds carriage returns to text jobs with solitary
	linefeeds. This will prevent stair-stepped
	output or output running off the right side of
	the page.
descramble	Automatic descrambling of print jobs passing
	through which have been scrambled using
	proprietary Unix scramble utility,
	npscramble.
xtab	Tab expansion from 1 to 16 spaces.

347