Chapter 16 Complete Command List

set sysinfo smtp <IPaddress> [port <portnum>] Example: set sysinfo smtp 192.75.11.5 port 25

Define the SMTP (Simple Mail Transfer Protocol) server IP address or domain name and port number where the mail is stored on your network.

Default: Unconfigured, 25

set sysinfo syslog <IPaddress>

Example: set sysinfo syslog 192.75.11.30

Set the IP address of the host running the SYSLOG daemon. Ethernet Interface debugging or print job and printer logging information can be sent to that IP address.

set sysinfo dns <IPaddress> Example: set sysinfo dns 192.75.11.2

Set your DNS server IP address so the Ethernet Interface can resolve host names when used with its built-in Telnet and ping clients.

set sysinfo descramblekey <hexval> Example: set sysinfo descramblekey 1234

Set the key value used for descrambling print jobs that have passed through Printronix npscramble utility on a TCP/IP host. This key is a four-digit hexadecimal value obtained from the host software, npscramble. Within the npscramble source code, there is a variable called SR_KEY which contains the default key value. This can be changed to any four-digit value you would like.

set sysinfo module [[-]novell] [[-]netbios] Example: set sysinfo module -novell

Enable and disable certain network protocol stacks within the Ethernet Interface. Sometimes it helps to disable any protocols you are not using on your network.

NOTE: [ - ] novell option is available on Adapter, Wireless only.

set user adddel <name> Example: set user add eng

Add or remove a user on the Ethernet Interface defined by <name>.

354

Page 354
Image 354
IBM 6500 manual Set sysinfo syslog IPaddress Example set sysinfo syslog