Set Commands
351
set snmp trap <index> [-]active
Enable or disable an SNMP trap manager table entry.
<index> is the index number of the SNMP trap manager
table. “active” enables the table entry, “-active” disables the
entry.
set snmp emailaddr <index> <emailaddress>
The Ethernet Interface can also send SNMP alert messages to
a desired e-mail address. To specify an e-mail address to send
alert messages to, use this command to add the e-mail address
to the SNMP alert table.
<index>
is the index number of the SNMP trap manager table.
<emailaddress> is the desired e-mail address of the form
user@domain.com.
set snmp emailformat <index> [-]short
Enable or disable the short e-mail message format for an
SNMP alert table entry. When enabled, the short e-mail format
can be used when messages will be viewed on devices having
a limited display size (a cellular phone or pager, for example).
<index>
is the index number of the SNMP alert table. “short”
enables the short e-mail format, “-short” disables it.
set snmp shortmsglen <index> <length>
Specify the length of the short e-mail message format for an
SNMP alert table entry. This command is effective only when
the short e-mail message format for an SNMP alert table entry
is enabled.
<index>
is the index number of the SNMP alert table. “length”
specifies the length of the short e-mail message, and has an
acceptable range of 15 to 80 characters.
set snmp email <index> [-]active
Enable or disable sending e-mail alert messages for an SNMP
alert table entry.
<index>
is the index number of the SNMP alert table. “active”
enables sending e-mail alert messages, “-active” disables it.