Configuring PSF For IPDS On V3R7 Or V4R1
251
3. Values must be entered for the following parameters:
a. Device Description (DEVD)
The device description or name.
b. Device Class (DEVCLS)
Specify *LAN
c. Device Type (TYPE)
Specify *IPDS
d. Device Model (MODEL)
Specify 0
e. LAN Attachment (LANATTACH)
Specify *IP
f. Port N umber (PORT)
Specify 5001
g. Font (FONT)
Enter an appropriate value.
h. Form Feed (FORMFEED)
Specify *CONT
i. Activation Timer (ACTTMR)
This value specifies the number of seconds that PSF waits
for a printer to respond to an activation request. If only one
system is using the printer, use the default value (170
seconds). If more than one system is using the printer,
specify *NOMAX, which causes PSF to wait indefinitely for a
response to an activation request.
j. Remote Location (RMTLOCNAME)
Enter the IP address or hostname of the printer.