Store Commands

store pping from default

Example: store pping from default

Store all the periodic ping default setting to flash memory so taht they are retained after power up.

store pserver from default

Set all general print server settings back to factory defaults.

store pserver from current

Store all current general print server settings to flash memory so they are retained after a power cycle. This ensures all current settings match what is stored in flash memory.

store pserver name

Example: store pserver name NIC1234

Command to change the print server name.

store pserver opts [[-]jobsecurity] [jobtimeout seconds]

Example: store pserver opts jobsecurity jobtimeout 5

If jobsecurity is disabled, any user can cancel queued jobs on the Ethernet including guest users. If jobtimeout is set to some value other than 0, the Ethernet will only wait this amount of seconds when getting printer feedback. This is only used if you have a logpath port and type set on a particular destination.

store pserver opts [[-]jobsecurity]

[jobtimeout <seconds>] [jobcontrol[offstandard enhanced]]

Example: store pserver opts [-]jobcontrol

If jobcontrol is disabled then the need for start of job / end of job flow control with the printer is determined by the printer. Job flow control is used for jobs requiring backchannel responses such as IPDS, TN and PJL jobs only. This is available as a performance enhancement for LPR, TCP socket printing etc. The job flow control has no affect on IPDS, TN, and PJL jobs. These options perform their own control. When jobcontrol is enabled all jobs will be supported with job flow control.

NOTE: When jobcontrol is disabled, dynamic config loading on a model change is also disabled.

335

Page 335
Image 335
IBM 6500 manual Command to change the print server name