IBM 6500 manual Set all TCP/IP network settings back to factory defaults

Store Commands

store tcpip tcp access [root] adddel <network> [<netmask>]

Example: store tcpip tcp access add 192.75.11.25

Add or remove an entry from the Ethernet Interface TCP access list defined by <network>. If the list has an entry, only this host can print to and remotely interact with the print server.

store tcpip from defaultcurrent Example: store tcpip from default

Set all TCP/IP network settings back to factory defaults.

Example: store tcpip from current

Store all current TCP/IP network settings to flash memory so they are retained after a power cycle. This ensures all current settings match what is stored in flash memory.

store tn dest <dest> connect <resourcename> Example: store tn dest d1prn connect MYRESNM

Store the resource name for the host session. The resource name must be the same as the name of the printer device created on the host for the session.

Default: Unconfigured (empty) resource name

store tn dest <dest> mode 52503270 Example: store tn dest d1prn mode 3270

Store the TN protocol mode.

Default: 5250

store tn dest <dxprn> host <IPaddress> Example: store tn dest d1prn host 192.75.11.1

Store the IP address of the TN5250/3270 host

Default: Unconfigured (empty) IP address

store tn dest <dxprn> port <portnum> Example: store tn dest d1prn port 27

Store the UDP port number of the TN server.

Default: 23

341