Chapter 7 Novell Host Configuration (10/100Base-T)
214
5. For the “Select Printer Drivers” dialog, choose no driver unless
you have a driver installed into the Broker's RMS which is to be
used with the printer.
Setup Using RPRINTER Mode
In this mode, an NDPS printer agent receives jobs from an NDPS
client, then forwards these jobs to a printer using the RPRINTER
IPX protocol.
1. The printer must first be set up to function in RPRINTER mode,
choosing any desired Print Server Name and Printer Number.
2. When setting up the NDPS printer agent, use the “Novell
Printer Gateway”.
3. For the “Novell PDS”, choose “((NONE))”.
4. For the “Port Handler”, choose “Remote (rprinter on IPX)”.
5. In the next dialog, for the “SAP Name” enter the Print Server
Name from step 1, and enter the Printer Number from step 1
above.
6. For the “Select Printer Drivers” dialog, choose no driver unless
you have a driver installed into the Broker's RMS which is to be
used with the printer.
The printer will need to be rebooted to attach to the NDPS printer
agent in this mode.