IBM 6500 NDS PSERVER Setup (Netware 4., /5.

NDS PSERVER Setup (Netware 4.x/5.x)
205
NOTE: NWAdmn3 x is only included with Netware 4.11 and higher
releases. If you are using Netware 4.10, you can either
upgrade to Netware 4.11 or go to Novell’s Web site and get
the patches to upgrade the Nwadmin program for Netware
4.10 to Nwadmn3
x for Netware 4.11. Alternatively, you can
perform the setup without using MPAdmin.
NDS PSERVER Setup (Netware 4. x /5. x )
There are a number of ways to configure the Ethernet Interface for
use in a Novell NDS PSERVER setup. These include using the
MPAdmin snap-in for Netware Administrator, using generic print
server objects in Netware Administrator, or by using PCONSOLE.
The following steps describe a setup using a generic print server
object in Netware Administrator. Setups using PCONSOLE are less
common and will not be discussed.
To create a printer/print queue in an NDS environment using
Netware Administrator print server objects:
1. Log in to Netware Administrator as a user with security equal to
“Admin” on your Novell host.
2. Click the right mouse button on a branch in the tree in which
you would like to create a print queue object.
3. Select “Create...” from the pop-up menu. The “New Object”
dialog box displays.
4. Select “Print Queue” from the “Class of new object” list, and
click “OK.”
5. Select “Directory Service Queue” and type the name of the
queue into the “Print Queue name” field.
6. Fill in the “Print Queue Volume” field by typing in a volume or
browsing for one. Click “Create.”
7. Click the right mouse button on a branch in the tree in which
you would like to create a printer object.
8. Select “Create...” from the pop-up menu. The “New Object”
dialog box displays.